Search results for " Cracks"

High-temperature in-process inspection followed by 96-h robotic inspection of intentionally manufactured hydrogen crack in multi-pass robotic welding

2021

Abstract This investigation introduces two new techniques to quantitatively address the challenging problem of understanding Hydrogen Induced Cracking (HIC) in welding processes. The first technique is a novel procedure to create a known and controlled HIC in a welded sample. The second is an in-process monitoring technique to measure the initial formation and subsequent growth of the HIC in a multi-pass weld whilst being compatible with the high temperatures associated with the welding process. The HIC was initiated using a localised quenching method of the weld and its character was verified using both macrograph and microscopic investigations. During HIC initiation and growth, the sample…

A Novel Biomimetic Approach to Repair Enamel Cracks/Carious Damages and to Reseal Dentinal Tubules by Amorphous Polyphosphate.

2017

Based on natural principles, we developed a novel toothpaste, containing morphogenetically active amorphous calcium polyphosphate (polyP) microparticles which are enriched with retinyl acetate (“a-polyP/RA-MP”). The spherical microparticles (average size, 550 ± 120 nm), prepared by co-precipitating soluble Na-polyP with calcium chloride and supplemented with retinyl acetate, were incorporated into a base toothpaste at a final concentration of 1% or 10%. The “a-polyP/RA-MP” ingredient significantly enhanced the stimulatory effect of the toothpaste on the growth of human mesenchymal stem cells (MSC). This increase was paralleled by an upregulation of the MSC marker genes for osteoblast differ…

Vertical Root Fracture initiation in curved roots after root canal preparation : a dentinal micro-crack analysis with LED transillumination

2017

Background One of the causative factors of root defects is the increased friction produced by rotary instrumentation. A high canal curvature may increase stress, making the tooth more susceptible to dentinal cracks. The purpose of this study was to evaluate dentinal micro-crack formation with the ProTaper NEXT and ProTaper Universal systems using LED transillumination, and to analyze the micro-crack generated at the point of maximum canal curvature. Material and Methods 60 human mandibular premolars with curvatures between 30–49° and radii between 2–4 mm were used. The root canals were instrumented using the Protaper Universal® and Protaper NEXT® systems, with the aid of the Proglider® syst…

BE contact analysis of delamination cracks actively repaired trhough piezoelectric active patches

2009

Automation of Optimized Gabor Filter Parameter Selection for Road Cracks Detection

2016

International audience; Automated systems for road crack detection are extremely important in road maintenance for vehicle safety and traveler's comfort. Emerging cracks in roads need to be detected and accordingly repaired as early as possible to avoid further damage thus reducing rehabilitation cost. In this paper, a robust method for Gabor filter parameters optimization for automatic road crack detection is discussed. Gabor filter has been used in previous literature for similar applications. However, there is a need for automatic selection of optimized Gabor filter parameters due to variation in texture of roads and cracks. The problem of change of background, which in fact is road text…

Discussion on “Experimental Deformation of Opalinus Clay at Elevated Temperature and Pressure Conditions: Mechanical Properties and the Influence of …

2021

AbstractThe testing procedure and results on saturated samples of Opalinus Clay in the work of Schuster et al. (Rock Mech Rock Eng https://doi.org/10.1007/s00603-021-02474-3, 2021) were conducted and presented using strain rates two to four orders of magnitudes higher than the rates needed to allow pore pressure equilibrium in the material, both in drained and undrained conditions. This leads to an erroneous estimation of the mechanical properties in saturated conditions. We discuss this aspect in the context of shale testing. We also discuss the effect of drying-induced fissuring on the mechanical properties of geomaterials tested in dry conditions.

Simultaneous measurement of temperature and strain in glass fiber/epoxy composites by embedded fiber optic sensors: II. Post-cure testing

2007

In this paper the use of fiber optic sensors embedded into GFRP laminates for structural health monitoring of thermo-mechanical loads is presented. The proposed sensing system, consisting of two coupled fiber Bragg grating (FBG) sensors, allows the simultaneous measurement of both temperature and strain by decoupling the change in reflected wavelength induced by temperature variations from that induced by either mechanical or apparent strain, with significant advantages either for monitoring the composite cure kinetics, as described in the accompanying paper (Part I), or for assessing the structural response to thermo-mechanical loads. Both thermal ramp and mechanical static/dynamic bending…

Outlier analysis and principal component analysis to detect fatigue cracks in waveguides

2009

Ultrasonic Guided Waves (UGWs) are a useful tool in structural health monitoring (SHM) applications that can benefit from built-in transduction, moderately large inspection ranges and high sensitivity to small flaws. This paper describes a SHM method based on UGWs, discrete wavelet transform (DWT), outlier analysis and principal component analysis (PCA) able to detect and quantify the onset and propagation of fatigue cracks in structural waveguides. The method combines the advantages of guided wave signals processed through the DWT with the outcomes of selecting defectsensitive features to perform a multivariate diagnosis of damage. The framework presented in this paper is applied to the de…

Evaluation of crack-closure by second harmonic thermoelastic stress analysis

2022

The work illustrates a new experimental approach to evaluate crack-closure in samples undergoing Fatigue Crack-Growing. Crack-closure leaves a peculiar signature on both amplitude and phase of the harmonic of the temperature signal at twice the loading frequency (Second Harmonic), due to the periodic nature of the internal elastic compression stresses. Thermoelastic Stress Analysis (TSA) is successfully applied to reveal such signatures on Single-Edge-Notched steel samples. A methodology is also proposed to evaluate the Crack-Opening-Load from temperature data. The work finally explores the influence of crack-closure on crack-tip identification and on the evaluation of the Stress Intensity …

Development and analysis of a model based on chirped fiber Bragg gratings employed for cracks characterization in materials

2018

In this work a model was developed that allows to understand the behavior of a chirped fiber Bragg grating for the detection and characterization of cracks in materials. In addition to the amplitude response, we show that the group delay of the grating provides useful information for the characterization of the crack. The position of the crack can be determined thanks to the linear chirp of the grating that fixes a correlation between the spatial position and both, the wavelength and the group delay. However, our analysis shows that this simple approach has a source of error, which can be overcome if a controllable external strain can be applied to the embedded grating, additional to the st…